PEN

Wireless machine tool measurement

Pen can be used for measurements like the run-out of machine spindles, back-lash in machine guideways, repeatability in fixtures or machine movements.

Features

Wireless

Bluetooth (perform measurements with machine doors closed

High accuracy

The measuring sensor is a LVDT sensor with ± 1 mm or ± 2.5 mm measurement range with high accuracy (within 0.001 mm)

Max-Min

Max-Min function used to measure run-out in machine spindles. The Pen sensor is mounted in the preferred measurement direction and measurement. Measurements are compiled over an adjustable measurement time and the results are displayed as a difference between the maximum and minimum values

Live Display

Live Display for Pen used to record measurement values from Pen sensors. The function displays the values from the probe as real time values but can also record measurement values and present a fixed value for a measurement point

Sizes

Pen is available in two sizes : P100 Measuring range: ±1mm Length: 60 mm (2.36”)P250 Measuring range: ±2,5mm Length: 85 mm (3,34”)

See our technology in action.

Schedule a free demo to get a first-hand look at how our solutions support your business.

Schedule a free demo

Resources

Pen
Brochure

Acoem Pen checks run-out and backlash

Pen is a battery-powered measuring probe that connects wirelessly via Bluetooth to a mobile device using an App. Pen can be used for measurements like the run-out of machine spindles, check spindle alignment, back-lash in machine guideways, repeatability in fixtures or machine movements.

The wireless transmission enables the sensor to be mounted in the machine without compromising the safty aspects for the operator with the machine doors closed.

Benefits of the Pen

Bluetooth (perform measurements with machine doors closed.)
High accuracy (within 0.001 mm)
Remote Display
Documentation
App based

Measurement range with high accuracy

The measuring sensor is a LVDT sensor with ± 1 mm or ± 2.5 mm measurement range with high accuracy (within 0.001 mm). The measuring sensor and battery assembly are enclosed and have a protection class of IP65 which will with stand coolant and oil.

The built-in battery is charged using a USB micro connector and has an operating time of 11 hours. The enclosure for the battery box contains built-in magnets that allow the device to be easily attached to a measuring stand or directly on the machine stand.

Min-Max function for run-out measurements

Max-Min function is used to measure run-out on machine spindles. The Acoem sensor is mounted in the preferred measurement direction compiles over an adjustable measurement time. The results are displayed as a difference between the maximum and minimum values.