VIB

Vibration dosimeter

VIB vibration dosimeter coming along with dBTrait-HV software offers the suitable solution to assessing individual exposure to vibrations at the workplace, in compliance with European directive 2002/44/EC and many international standards. (ISO 8041 (2005), ISO 5349 (2001), ISO 2631 (1997)).

Contact us Resources

Features

Metrology
Simple vibrometer: acceleration, peak, peak - peak, peak factor, rms (x, y, z)Hand-arm: acceleration, peak, peak - peak, rms (x, y, z), ahv, A(8)Whole-body: acceleration, peak, peak - peak, peak factor, rms (x, y, z), av, aeq, A(8),A(8)v, VDV, MTVV, SEATSignal recording: manual or on trigger (femax = 8192Hz (optional on 1 channel))Parallel measurement and time history of all indicators
Standards
SO 8041 (2005), ISO 5349 (2002), ISO 2631 (1997)CEM Radio ETSI EN 300 328 V1.5.1 (2004) / Emission CEI IEC 61000-6-3 /CEI IEC 61000-6-4 / Immunity CEI IEC 61000-6-1 / CEI IEC 61000-6-2
Memory module
Integrated 2 GB flash memory, type Micro SDStorage of measurement files (minimum rate: 1s)Signal storage (programmable sampling frequency)
Performances
Typical battery life: 16 hours (stand-alone mode) / 10 hours (remote controlled mode)3.7 V - 2.3 A battery - Charging time: 6h30 (USB or charger)

See our technology in action.

Schedule a free demo to get a first-hand look at how our solutions support your business.

Schedule a free demo

Resources

VIB
Brochure

Occupational health

The VIB occupational vibration dosimeter is a portable, ergonomic, and very light instrument used to measure the occupational vibration, treat the signal, and transfer the stored data:

  • vibration levels in the X, Y, and Z axis and daily dose of exposure A(8)
  • seat for whole body measurements and 3 adaptors for hand-arm measurements
  • accelerometer for SEAT measurement
  • signal recording, Spectrum calculation in 1/3 octaves
  • presence sensor for whole body measurements
  • battery life up to 16h

Wireless control

Using a notebook or a computer, you can setup the settings of the VIB, with the use of the dBA(8) software and control them in real time, enabling the user to monitor the measurements at a safe distance from the agents:

  • simultaneous control of diverse VIB dosimeters
  • beginning of the measurement: Auto Run – Turns on and off automatically or by the presence sensor of whole body measurements
  • signal recording: Manual and Automatic (trigger)
  • management of the measurement settings
  • recording of the measurement files
  • viewing in real time of the measured data
  • voice and written comments
  • languages: English, French and Portuguese

dBTrait-HV software

The dBTrait-HV for transference, analysis and printing of the measurement results:

in accordance with the standards ISO5349, ISO2631, NHO09, and NHO10 indication of the exposure, according to the European Directive 2002/44/EC and ACGH calculation of the Dose of Global Vibration and by codified events whole Body (occupational, comfort, and perception. Sitting, standing or lying down) hand-arm time histories of all the indicators calculations of average values between the cursors languages: English, French and Portuguese

Available packages

Kit VIB Expert: VIB occupational vibration dosimeter, whole body accelerometer for whole body measurements, hand-arm accelerometer, accelerometer for SEAT measurements, 03 hand-arm adaptors, Bluetooth key, certificates of conformity, USB cable, case.
dBA(8) and dBTrait-HV software, operating manual, interactive training.

Optional: calibration certificates, maintenance contract (technical support, hotline, trainings, etc.).

Features

  • hand-arms and whole body occupational vibration VIB dosimeter
  • built according to the standards ISO8041 (2005)
  • dBA(8) Software for monitoring at distance (for Tablet, or Computer)
  • dBTrait-HV Software for data post-processing ( results according to ISO2631-1 / ISO5349-2)
  • spectrum in real time (1/1; 1/3 octaves)
  • whole body triaxial seat accelerometer (18g) with a cable of 1.2m
  • hand-arm mini triaxial accelerometer with a cable of 2m and 3 standard mounting accessories
  • accelerometer with presence sensor
    communication by Bluetooth and USB

Applications

Discover Acoem’s case studies

Our case studies

Addressing the issue of individual exposure to vibration

Light, robust and compact, VIB is a suitable instrument for the measurement of «hand-arm» and «whole-body» vibrations, according to the requirements of European Directive 2002/44/EC.

Request pricing

Connect with Acoem

Contact us to learn more about our solutions, services, and training programs.

Would you like to…?